- This page shows a list of downloadable files for the Active USB-COM Port Driver of DENSO WAVE’s automatic data capture devices. DENSO WAVE serves as a leader in developing and manufacturing automatic data capture devices for QR codes and IC cards and industrial robots (FA equipment), etc.
- The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.
Download Passport Usb Interface (com4) Driver Windows 10
1) Obtain a USB Flash drive that has at least 256 MB of available capacity. 2) Download the SPARK Science Learning System firmware update to your computer hard drive. 3) Copy the 'spark.upd' file to the top level of the file structure of the USB Flash drive.
-->Download Passport Usb Interface (com4) Driver Download
For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following:
Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port.
To configure a serial port as COM port, comply with the requirements that are defined in Configuration of COM Ports.
For more information about installing serial ports and COM ports using the Ports device setup class and the Serial function driver, see the following topics:
If you do a custom installation of a COM port, you must comply with the COM port requirements that are defined in Configuration of COM Ports.